Description
E50361Z
Frigoboat Thread Keel Cooler with Zinc.
Frigoboat Keel Cooler fitting Thread Mount. Similar to a regular thru-hull fitting, where the throat passes through the hull, and a nut is threaded onto the shaft and tightened.
The keel-cooler must be mounted within 5′ of the compressor.
A Frigoboat keel-cooler acts as the condenser for the system. The R134a refrigerant is circulated by the compressor, down through tubing in-bedded in the sintered bronze mounted on your hull. This is where the heat exchange takes place, removing the heat completely from the refrigerant and not into vessel.
NO PUMP! NO FAN! NO NOISE!!!
Choose either the model with zincs (E50361Z) or, if you can connect the keel cooler into your bonding system, choose the model without zincs (50361).
p65warnings.ca.gov/
These warnings are not an indication that these products are violating any safety standards or regulations.
However, as our products might be sold in the state of California, we are legally obliged to inform customers about the potential presence of these chemicals in our products.
